 |
|
 |
|
|
|
|
|
|
|
 |
|
Glazier |
  |
Select Alternate Year - 2005 - 2006 - 2007 - 2008 - 2009
There have been no changes to this trade in the year of 2009.
Glaziers cut and install glass and aluminum systems for commercial, residential and automotive applications.
In general, glaziers:
Glaziers work in a variety of environments. Some work outdoors at construction sites, sometimes on scaffolds and swing-stages (platforms suspended from the top of high rise buildings). Others work in factories installing glass in wooden or metal frames, or in shops replacing glass in vehicles or furniture. They generally work 40 hours a week, but may have to work overtime to meet construction deadlines.
There is some risk of injury from sharp edges and broken glass.
The work is most rewarding for those who enjoy variety, developing special skills and seeing the results of their work.
To be successful in their trade, glaziers need:
Computer skills are an asset.
Glaziers are employed by construction companies, architects, interior design firms and glazier shops. The steady demand for repair work somewhat offsets economic slowdowns in the construction industry, but conditions in the construction industry do affect employment prospects, and employment may be seasonal.
Journeyperson wage rates vary, but generally range from $25.68 to $27.14 an hour plus benefits.
Experienced glaziers may advance to supervisory positions such as foreman or contract manager, or set up their own shops doing work for private homes and small businesses.
To work as a Glazier in Alberta, a person must:
Glaziers learn their skills by registering with Alberta Apprenticeship and Industry Training to participate in apprenticeship training and, upon successful completion, are awarded the Alberta Journeyman Certificate.
A glazier who holds a valid trade certificate from Alberta or from another Canadian province or territory may apply to write the Interprovincial Exam and, if successful, be granted a Red Seal under the Interprovincial Standards Program. The Red Seal is recognized throughout most of Canada.
A glazier who holds a certificate that was issued by another recognized apprenticeship authority in Canada (province, territory or federal jurisdiction) may apply for an Alberta Equivalency document under the Equivalency Program.
Glaziers who:
may be eligible to apply for trade certification under the Qualification Certificate Program.
Individuals possessing a valid Alberta Journeyman Certificate, an Alberta Occupational Certificate, or a credential that is recognized as equivalent to an Alberta trade or occupational certificate are eligible to receive a Blue Seal business credential after completing the necessary requirements.
The term of apprenticeship for a glazier is 4 years (four 12-month periods) including a minimum of 1620 hours of on-the-job training and 6 weeks of technical training each year.
To learn the skills required of a glazier in Alberta and be issued an Alberta Journeyman Certificate, a person must:
Most employers prefer to hire high school graduates and may select apprentices from among their current employees.
- during on-the-job training, apprentice glaziers earn at least 55 percent of the journeyperson wage rate in their place of employment in the first year, 60 percent in the second, 65 percent in the third, and 70 percent in the fourth year.
- select an educational institution that offers training for Glazier apprentices, and a time to attend training (see Technical Training Locations and Schedule)
- determine requirements for enrolling at the selected institution, and forward completed enrollment form to the selected institution (see Enrollment Instructions)
Apprentices may attempt the Interprovincial Exam in the final period of their apprenticeship training and, if successful, be granted a Red Seal. (see Exam Counselling Sheets)
When apprentices attend technical training, they are required to pay the applicable tuition fee and purchase course supplies.
Grants, scholarships and other financial assistance may be available. For more information see Financial Assistance or contact an Apprenticeship and Industry Training Office.
To qualify for a Red Seal, a person must:
- an Alberta trade certificate or completion of apprenticeship certificate, OR
- a journeyperson or completion of apprenticeship certificate issued by another Canadian province or territory
To qualify for an Equivalency document based on a recognized credential, a person must:
A person who has a recognized certificate, as described above, does not require an Alberta Equivalency document to work in the trade in Alberta. However, some employers may require an Alberta Equivalency document as proof that the certificate is equivalent to the requirements of the trade in Alberta.
To qualify for a Qualification Certificate based on Canadian credentials, a person must:
To qualify for an Alberta Qualification Certificate based on work experience, a person must:
Time spent on supervisory or foreman duties, counter work, heading the tool crib, or on a training course is NOT counted as ‘hands-on’ work experience.
This application fee covers the verification and assessment of the applicant's work experience hours/months as well as one attempt at the Qualification Certificate theory examination. The Qualification Certificate practical examination requires a separate fee as identified on the application noted above.
