 |
|
 |
|
|
|
|
|
|
|
 |
|
Ironworker - Structural/Ornamental |
  |
Select Alternate Year - 2005 - 2006 - 2007 - 2008 - 2009
Ironworker -Structural/Ornamental tradespeople fabricate, construct and join scaffolding, structural steel buildings, bridges, ornamental ironwork and pre-cast structures.
They erect structural steel components, install conveyors and robotic equipment, and sometimes perform reconstructive work on existing structures.
In general, ironworker -structural/ornamental tradespeople:
Ironworker -Structural/Ornamental tradespeople generally work outdoors in teams or crews in remote locations as well as urban areas. Their work is physically strenuous and often dangerous. They often work at great heights and must rely on one another to use good judgment as well as safety equipment and procedures to reduce the risk of injury from falling or from falling objects. Adverse weather conditions such as rain, snow or high winds can shut down projects for days at a time.
Successful ironworker -structural/ornamental tradespeople enjoy developing their expertise by doing precise work in a broad range of industries and locations. They enjoy the outdoors and often like travelling and working with different crews.
To be successful in their trade, ironworker -structural/ornamental tradespeople need:
Most ironworker -structural/ornamental tradespeople are employed by construction contractors, but some are employed in industries such as metal fabricating, oil and gas production, iron and steel production, electric utilities and rail transport. Very few ironworkers are self-employed. In the construction industry, ironworkers work on a project-to-project basis and frequently travel long distances from job to job. Union members work out of union hiring halls where work is allocated on a rotating basis.
Employment is seasonal, and employment prospects change with the economic climate, particularly with the volume of commercial and industrial construction projects.
Journeyperson wage rates vary, but generally range from $20 to $30 an hour plus benefits.
Experienced ironworker -structural/ornamental tradespeople may advance to supervisory positions such as foreman and construction superintendent.
To work as an Ironworker - Structural/Ornamental tradesperson in Alberta, a person must be a registered apprentice or a certified journeyperson or hold a recognized trade certificate. (see Recognized Trade Certificates)
Ironworkers learn their skills by registering with Alberta Apprenticeship and Industry Training to participate in apprenticeship training and, upon successful completion, are awarded the Alberta Journeyman Certificate.
An ironworker -structural/ornamental tradesperson who holds a valid trade certificate from Alberta or from another Canadian province or territory may apply to write the Interprovincial Exam and, if successful, be granted a Red Seal under the Interprovincial Standards Program. The Red Seal is recognized throughout most of Canada.
An ironworker who holds a certificate that was issued by another recognized apprenticeship authority in Canada (province, territory or federal jurisdiction) may apply for an Alberta Equivalency document under the Equivalency Program.
Ironworkers who:
may be eligible to apply for trade certification under the Qualification Certificate Program.
Individuals possessing a valid Alberta Journeyman Certificate, an Alberta Occupational Certificate, or a credential that is recognized as equivalent to an Alberta trade or occupational certificate are eligible to receive a Blue Seal business credential after completing the necessary requirements.
The term of apprenticeship for an ironworker -structural/ornamental tradesperson is 3 years (three 12-month periods) including a minimum of 1500 hours of on-the-job training and 6 weeks of technical training each period.
To learn the skills required of a ironworker in Alberta and be issued an Alberta Journeyman Certificate, a person must:
Most employers prefer to hire high school graduates and may select apprentices from among their current employees.
- during on-the-job training, apprentice ironworkers earn at least 60 percent of the journeyperson wage rate in their place of employment in the first year, and 70 percent in the second.
- select an educational institution that offers training for Ironworker - Structural/Ornamental apprentices, and a time to attend training (see Technical Training Locations and Schedule)
- determine requirements for enrolling at the selected institution, and forward completed enrollment form to the selected institution (see Enrollment Instructions)
Apprentices may attempt the Interprovincial Exam in the final period of their apprenticeship training and, if successful, be granted a Red Seal. (see Exam Counselling Sheets)
When apprentices attend technical training, they are required to pay the applicable tuition fee and purchase course supplies.
Grants, scholarships and other financial assistance may be available. For more information see Financial Assistance or contact an Apprenticeship and Industry Training Office.
To qualify for an Equivalency document based on a recognized credential, a person must:
A person who has a recognized certificate, as described above, does not require an Alberta Equivalency document to work in the trade in Alberta. However, some employers may require an Alberta Equivalency document as proof that the certificate is equivalent to the requirements of the trade in Alberta.
To qualify for a Qualification Certificate based on Canadian credentials, a person must:
To qualify for an Alberta Qualification Certificate based on work experience, a person must:
- a certified structural steel and plate fitter must have at least 5,400 hours and 36 months of ‘hands-on’ work experience as a ironworker
- a certified boilermaker must have at least 5,400 hours and 36 months of ‘hands-on’ work experience as a ironworker
- a certified ironworker – metal building systems erector and structural/ornimental ironworker must have at least 2,250 hours and 18 months of ‘hands-on’ work experience as a ironworker
- a certified Ironworker - Reinforcing tradesperson must have at least 3000 hours and 24 months of ‘hands-on’ work experience as a ironworker
Time spent on supervisory or foreman duties, counter work, heading the tool crib, or on a training course is NOT counted as ‘hands-on’ work experience.
This application fee covers the verification and assessment of the applicant's work experience hours/months as well as one attempt at the Qualification Certificate theory examination. The Qualification Certificate practical examination requires a separate fee as identified on the application noted above.
